EN (CA$) 
FR (CA$) 
EN (US$) 
Bugbusters boat companionway insects screens: A simple solution for no-see-ums, mosquitos and other bugs...
Unique to the market, the Bugbusters companionway insects screens ties to the handrails or is fixed with our new snap kit and drops down to the cockpit floor.
No velcro or frame needed. Allows full companionway opening permitting very easy access to and from cockpit. The original, long lasting UV grade Polyester mesh, not a copy!
FEATURES and SPECS
- Installs easily with 2 knots to hand rails with built-in ties or with our new snap kit (see below)
- Allows easy access to and from cockpit
- 24 Very small Holes/Inch or about 1mm size, No-See-Um proof
- 100% UV resist Polyester mesh, military spec, US made
- Strong UV resist Polyester thread
- Lead ballasted (will not affect compass)
MEASUREMENTS
Measure maximum inside measurement from forward of companionway to bottom and add about 2-3 inches.
Then take width outside companionway sides and add height of sides over the roof, to get width of screen.
Example: A 30" x 68" inside opening, would use a 36" x 72" screen.On the tapered screens, the tapering begins at the halfway point of the length, 34" and 39" respectively. For the 44 x 38 screen, the taper begins at 26 inches.
Learn more on how to measure your companionway before ordering.
Strong plastic carrying case included!
AVAILABLE SIZES - BUGBUSTERS COMPANIONWAY SCREENS
MD3672
36" x 72"
(91 cm x 183 cm)
Standard: fits most small sailboats
Rectangle
MD4278
42" x 78"
(107 cm x 198 cm)
Bigger size. Good for big catamarans, powerboats
Rectangle
MD4077
40" x 77"
(102 cm x 196 cm)
Fit many Beneteau's and Jeanneau's, MacGregor 26
(tapering to 28" wide at bottom)
MD4868
48" x 68"
(122cm x 173cm)
Catalina (except 30, 380, 400), Caliber, Endeavour
(tapering to 28" wide at bottom)
MD3844
38" x 44"
(97cm x 112cm)
Catalina 380, 400
(tapering to 29" wide at bottom)
MD6088
60" x 68"
(152cm x 173cm)
Catalina 30
(tapering to 28" wide at bottom)
OPTIONAL BUGBUSTERS COMPANIONWAY SCREENS FIX KIT
We reccommend our new "Snap kit" to install companionway screens fix kit, if you have a Dodger, or do not have handrails or easy access point for straps attachments.
- Now have an easy way to install and remove your screen!
- Can be added on existing Bugbusters screens
Easy install
- You just need to drill a small hole on each side of the companionway entrance.
- Then put a bit of silicone and screw the male snaps on deck.
- Slide the companionway screen webbings in the buckles.
- Adjust and snap in place.
